Bambu Lab P2S With AMS
Bambu Lab P2S
Product Features
- AI-powered print monitoring with dual NPU (detects spaghetti, nozzle clog, and print start errors)
- 50°C Active Heated Chamber with adaptive airflow and carbon filter
- Upgraded PMSM DynaSense Servo Extruder with 20 kHz real-time control
- Up to 8.5 kg extrusion force for high-speed, stable printing
- Active flowrate compensation for ultra-smooth layer consistency
- Quick-swap hotend and hardened steel nozzle for easy maintenance and durability
- 1080p camera with LED lighting for live view and timelapse recording
- Integrated 2-in-1 filament buffer with AMS combo support
Bambu Lab P2S - Technical Specifications
Printing Technology
| Fused Deposition Modeling |
Body
| Build Volume (W*D*H) | 256*256*256 mm³ |
| Chassis | Plastic and Steel |
| Outer Frame | Plastic and Glass |
Physical Dimensions
| Physical Dimensions | 392*406*478 mm³ |
| Net Weight | 14.9 kg |
Toolhead
| Extruder Gear | Hardened Steel |
| Nozzle | Hardened Steel |
| Max Nozzle Temperature | 300 ℃ |
| Included Nozzle Diameter | 0.4 mm |
| Supported Nozzle Diameter | 0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm |
| Filament Cutter | Built-in |
| Filament Diameter | 1.75 mm |
| Extruder Motor | Bambu Lab High-precision Permanent Magnet Synchronous Motor |
Heatbed
| Build Plate Material | Flexible Steel Plate |
| Included Build Plate Type | Textured PEI Plate |
| Supported Build Plate Type | Textured PEI Plate, Smooth PEI Plate, Cool Plate SuperTack |
| Max Heatbed Temperature | 110 ℃ |
Speed
| Max Speed of Toolhead | 600 mm/s |
| Max Acceleration of Toolhead | 20,000 mm/s² |
| Max Flow for Hotend | 40 mm³/s (Test parameters: 250 mm round model with a single outer wall; Bambu Lab ABS; 280 ℃ printing temperature) |
Filtration
| Activated Carbon Filter Type | Granulated Coconut Shell |
| VOC Filtration | Supported |
| Particulate Matter Filtration | Supported |
Cooling
| Part Cooling Fan | Closed Loop Control |
| Cooling Fan for Hotend | Closed Loop Control |
| Auxiliary Part Cooling Fan | Closed Loop Control |
Supported Filament Type
| PLA, PETG, ABS, ASA, TPU, PET, PA, PC, PVA; Carbon/Glass Fiber Reinforced: PLA-CF, PETG-CF, ABS-GF, ASA-CF, PA6-CF, PA6-GF, PAHT-CF, PPA-CF, PET-CF | Supported |
Sensor
| Camera | Built-in; 1920*1080; 30 fps HD |
| Door Sensor | Supported |
| Filament Run Out Sensor | Supported |
| Filament Tangle Sensor | Supported |
| Filament Odometry | Supported with AMS |
| Power Loss Recovery | Supported |
Electrical Requirements
| Voltage | 100–120 VAC / 200–240 VAC, 50/60 Hz |
| Max Power* | 1200 W@220 V / 1000 W@110 V |
| PLA Steady-State Power | 200 W@220 V / 200 W@110 V (PLA printing) |
Electronics
| Touchscreen | 5-inch 854*480 Touchscreen |
| Storage | Built-in 8 GB EMMC and USB Port |
| Control Interface | Touchscreen, mobile App, PC App |
| Motion Controller | Dual-core Cortex-M4 and Single-core Cortex-M7 |
| Application Processor | Quad-core 1.5 GHz ARM A7 |
| Neural Processing Unit | 2 TOPS |
Software
| Slicer & Software | Bambu Studio. Supports third-party slicers that export standard G-code (e.g., SuperSlicer, PrusaSlicer, Cura); certain advanced features may not be supported. |
| Supported Operating System | MacOS, Windows, Linux |
Network Control
| Ethernet | Not Available |
| Wireless Network | Dual-Band Wi-Fi |
| Network Kill Switch | Not Available |
| Removable Network Module | Not Available |
| 802.1X Network Access Control | Not Available |
Wi-Fi
| Operating Frequency | 2412–2472 MHz, 5150–5850 MHz (FCC/CE); 2400–2483.5 MHz, 5150–5850 MHz (SRRC) |
| Wi-Fi Transmitter Power (EIRP) | 2.4 GHz: <23 dBm (FCC); <20 dBm (CE/SRRC/MIC) — 5 GHz Band1/2: <23 dBm (FCC/CE/SRRC/MIC); Band3: <30 dBm (CE) / <24 dBm (FCC); Band4: <23 dBm (FCC/SRRC) / <14 dBm (CE) |
| Wi-Fi Protocol | IEEE 802.11 a/b/g/n |
* To ensure the heatbed quickly reaches the needed temperature (35–110℃), the printer will maintain maximum power for about 3–5 minutes.